Ilford 2150 - $499
The Ilford Ilfolab 2150 RC table-top processor is a full-featured, self-contained, low-cost system. It delivers uniform, high-gloss or smooth-finished infrared prints free of blemishes- at a throughput rate of 460 8x10 inch prints per hour.

Both the feed-in and retrieval slots are at the front of the housing, so that the unit can be placed against any wall of a lab or darkroom with accessible water and drain connections.
A special cost saving feature is the automatic standby mode. when not in use, the processor will switch to a standby mode to minimize power and water consumption. An extra plus- the Ilfolab 2150 uses cold water exclusively.
Capacities
Processor Speed: 36 inches/min
Dryer Speed: 36 inches/min
Processing Time for 8x10 Prints: 72 seconds
Maximum Output of 8x10 Prints: 460/hr
Processing Temperature: 95 Degrees F
Print Sizes
Max Width of 20 inches, Minimum Length of 5 inches
Tank Capacity
Total Volume Developer Tank Capacity: 14 liters
Total Volume Fixer Tank Capacity: 14 liters
Wash Tank Capacity: 12 liters
Dimensions
Height with Dryer: 19.2 inches
Width: 29.9 inches
Length: 35.0 inches
Weight with Dryer- No Solutions: 192 lbs
Electrical Supply
Voltage: 120V
Frequency: 60 HZ
Wattage: 2000W
This processor is used but in good working condition. Call us at 918.742.0500 and talk with Jeff for more details.


